Manual

16 Rockwell Automation Publication ICM-UM004C-EN-E - February 2014
Chapter 1 Installation
The characteristics of output (V) and gap (mm) are as shown in the graph below.
Speed Measurements
Assumes measurements are made with a 5 mm or 8 mm probe.
Figure 2 - Dimension of target (recommended for rotational speed measurement):
mm mils
Recommended dimension of
target (mm)
A ≥ 6A ≥ 236
B ≥ 7B ≥ 275
C ≥ 2.5 C ≥ 98
D ≥ 15 D ≥ 590
Recommended set gap (mm) 1.0...1.5 39...59
D
A
B
C
D D
A
C
B
C