Owner manual

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 97
Chapter 3
Loading and Unloading
This chapter describes using the Enpac 2500 with Emonitor to load and unload
lists.
Setting Up for
Communication
This section describes the steps to set up communication both in Emonitor and
in your data collector. The steps include:
• Selecting the computer communication options in Emonitor.
• Selecting the Enpac 2500 as the current data collector.
• Setting up the data collector to communicate with the computer.
• Installing ActiveSync to communicate through a USB port.
• Connecting the data collector and the computer.
Many of the steps are completed from the Load/Unload dialog (Figure 21
). You
use the Set Up Collector button and the Set Up Computer button to set up the
Enpac 2500 and computer for communication.
Topic Page
Setting Up for Communication 97
Loading Lists to the Data Collector 106
Unloading Lists from the Data Collector 113
IMPORTANT
For more information about loading lists and the Load/Unload dialog, refer
to the Emonitor online help.