Owner manual

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 257
Run Up/Coast Down Application Chapter 10
Setting Up Run Up/Coast
Down Measurements
The first step in the Run Up/Coast Down application is to set up how the data
will be acquired by the data collector.
1. Select RUCD on the Main Menu and press the READ/OK key.
The RUCD screen appears.
2. Select Setup and press the READ/OK key to set up the Run Up/Coast
Down parameters.
The RUCD - Setup screen appears.
3. Highlight the option and press the RIGHT ARROW key to open a menu
of choices.
4. Select the choice by pressing the arrow keys or type in a value using the
numeric key pad.
5. Press the LEFT ARROW key to save your selections.
6. Press F3 (Save) to save the current settings to a file.
Refer to
Saving Run Up/Coast Down Measurements on page 279.
To highlight an option, press the UP and
DOWN ARROW keys.