Owner manual

246 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 9 Time Recorder Application
Recalling a Setup
You can recall a previously saved setup and use it to record another measurement.
The setup may have been saved only as a setup, or may have been saved with the
recorded measurement.
Refer to
Saving a Time Recorder Setup and Measurement on page 244.
1. Connect the transducer to the Enpac 2500.
Refer to
Connect a Transducer to the Data Collector on page 120.
2. Attach the transducer(s) to the machine case or structure.
3. Select Recorder on the Main Menu and press the READ/OK key. The
Recorder screen appears.
4. Select Recall and press the READ/OK key. The Recorder - Load Setup
screen appears.
5. Highlight the filename that you want recall and press F4 (Open).