Owner manual

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 185
Multi-channel Measurements Chapter 6
7. Select Input Channel and press the Right arrow to display the input
channel choices.
8. Select the channel and press the Left arrow key.
See External Connections
on page 23 for complete information on the
connectors and related channels.
9. Change the other parameters as needed.
See Offroute Orbit Parameters
on page 167 for assistance.
You can also set the Acquisition parameter in the Instrument
Configuration screen to Single Shot or Continuous.
– In Single Shot mode, the unit halts when the data collector has settled
and the data is stable.
– In Continuous mode, the unit constantly analyzes and displays the
moving signals until you store the data by pressing the Enter key.
See Instrument Configuration Parameters
on page 44.
10. You are now ready to collect the dual channel measurement.
See Collect a Cross Channel Phase Measurement
on page 178.