Owner manual

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 183
Multi-channel Measurements Chapter 6
This figure shows a typical setup for a two-channel measurement.
Figure 34 - Two-channel Measurement Definitions
9. Connect the data collector to the computer and load the list to the unit.
See Loading Selected Lists to the Data Collector
on page 111.
10. Once you have prepared the unit for data collection, select the route and
collect the dual channel measurement.
Collect an Offroute Two-channel Measurement
The two-Channel Offroute measurement is configured by creating a user-defined
measurement point. The Enpac 2500 data collector keeps the user-defined
parameters until you collect another measurement point or press F2 (Default) on
the Offroute User screen.
See Create and Collect a User-defined Point
on page 141 for more information.
1. Select Data Collection from the Main Menu and press the Enter key.
The Route Manager screen appears.
2. Select a route.
3. Press F2 (Offroute) to collect an Offroute measurement.