Owner manual

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 177
Multi-channel Measurements Chapter 6
The Offroute User screen appears.
5. Select Display Format and press the Right arrow key to display the format
choices.
6. Select Phase and press the Left arrow key to save your choice.
7. Select Input Channel and press the Right arrow key to display the input
channel choices.
8. Select X&Y and press the Left arrow key.
9. Change the other parameters as needed.
See Offroute Orbit Parameters
on page 167 for assistance.
10. You are now ready to collect the cross channel phase measurement.
See Collect a Cross Channel Phase Measurement
on page 178.