Owner manual

108 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 3 Loading and Unloading
To Manually Initialize the Data Collector Any Time
You must have the Enpac 2500 connected to the computer. You can also use the
Enpac 2500 to initialize memory.
1. Choose Tools > Load/Unload.
2. Click the D.C. Functions button in the Load/Unload dialog. The Data
Collector Functions dialog appears.
3. Click the Initialize Data Collector button. A progress bar appears
providing a status of the initialization.
4. When initialization is complete, click Close.
TIP
If you are manually initializing the memory card, you must also have the
card in the drive.
Refer to
Inserting and Removing a Memory Card on page 48.