Owner manual
Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 101
Loading and Unloading Chapter 3
Set Up Computer Communication Options in Emonitor
Before you can load a list into the Enpac 2500, you must first set up the computer
communication options in Emonitor. Once you select these communication
options, you should not have to change them again unless you change your
computer hardware.
1. Choose Tools > Load/Unload.
2. Click the large Set Up Computer button in the Load/Unload dialog.
The Set Up Computer dialog appears.
3. Select your Communications Device such as COM1, COM2 or USB.
Refer to
Using the USB Port on page 103 for information on how to
connect your computers USB port.
4. Click OK when you are finished.