User guide

Rockwell Automation Publication 1441-UM004A-EN-P - May 2011 63
Balancing Extension Module Chapter 2
Review Balancing Measurements
The Review option lets you view stored settings and measurement data from
previous balancing measurements.
Follow these steps to review past balancing runs.
1. From the Balance main menu, select Review and press Enter.
The Balance - Review Data screen appears.
2. Select a balance measurement and press F3 (Open).
3. The Go To screen appears.
4. Press the Up/Down arrows to select past data.
5. Press F2 (Go To Pt.).