Owner's manual

Publication GMSI10-UM010C-EN-P - May 2010
88 DeviceNet Objects
Services
Analog Input Point Object
(Class ID 0A
H
)
The Analog Input Point Object is used to model the Eccentricity
measurements made by the Eccentricity module.
Class Attributes
Instances
Table C.19 Connection Object Services
Service
Code Class/Instance Usage Name
05
h
Instance Reset
0E
h
Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
Table C.20 Analog Input Point Object Class Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
1 Get Revision UINT Revision of the
implemented object.
2
Table C.21 Analog Input Point Object Instances
Instance Name Description
1 Eccentricity 1 Eccentricity measurement for Channel 1
2 Eccentricity 2 Eccentricity measurement for Channel 2
3 Min Gap 1 Min Gap for Channel 1
4 Min Gap 2 Min Gap for Channel 2
5 Max Gap 1 Max Gap for Channel 1
6 Max Gap 2 Max Gap for Channel 2