Owner's manual

Publication GMSI10-UM003D-EN-P - May 2010
122
Services
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
Band Measurement Object
(Class ID 31E
H
)
The Band Measurement Object models the measurement of the amplitude of a
signal within a narrow frequency range.
Class Attributes
The Band Measurement Object provides no class attributes.
17 Get/Set Speed Range
Low
REAL Indicates the lesser
threshold of the machine
speed range for which the
alarm is enabled (disabled
at lesser speeds).
CPM
(Must be less than Speed
Range High)
18 Get/Set Name STRING2 A name to help identify
this alarm.
19 Get/Set Measurement
Identifier
EPATH Identifies the
measurement object to
which this alarm is
applied.
See Parameter Object instances
7 to 18.
20 Get/Set Inhibit Tach
Fault
BOOL Determines whether the
Tach Fault status is
prohibited during the
startup period.
0 = Tach Fault allowed
1 = Tach Fault inhibited
Table C.28 Alarm Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
Table C.29 Alarm Object Services
Service
Code Class/Instance Usage Name Description
0E
h
Instance Get_Attribute_Single Returns a single attribute.
10
h
Instance Set_Attribute_Single
Sets a single attribute.
1