Owner's manual

Publication GMSI10-UM003D-EN-P - May 2010
117
1 The Poll Connection Produced Connection Path and Size parameters cannot be set while the Poll connection is
already established with a master/scanner. Attempting to do so will result in an "Object State Conflict" error
(error code 0xC). These Parameter instances are a little more flexible than the actual Connection Object
attributes because they can be set while the connection is in the NON-EXISTENT state (before the
master/scanner allocates the connection).
27 No Relay 4 Alarm Identifier B USINT 0 = Alarm 1
1 = Alarm 2
2 = Alarm 3
3 = Alarm 4
4 = Alarm 5
5 = Alarm 6
6 = Alarm 7
7 = Alarm 8
8 = Alarm 9
9 = Alarm 10
10 = Alarm 11
11 = Alarm 12
0
28 No Relay 5 Alarm Identifier B USINT 0 = Alarm 1
1 = Alarm 2
2 = Alarm 3
3 = Alarm 4
4 = Alarm 5
5 = Alarm 6
6 = Alarm 7
7 = Alarm 8
8 = Alarm 9
9 = Alarm 10
10 = Alarm 11
11 = Alarm 12
0
29 No Channel 1 Filter Type USINT 0 = Tracking
1 = Bandpass
0
30 No Channel 2 Filter Type USINT 0 = Tracking
1 = Bandpass
0
31 No Poll Connection Produced
Connection Path
1
USINT 101-102 (Assembly Object
instance number)
101
32 No Poll Connection Produced
Connection Size
1
UINT 4-124 36
Table C.22 Parameter Object Instances
Instance
Read
Only Name Data Type Valid Values Default Value