Manual

Publication GMSI10-UM008D-EN-P - August 2010
91
Instance 199 - Dynamic Assembly
This Assembly instance can be created and configured with the XM Serial
Configuration Utility or RSMACC Enterprise Online Configuration Utility.
Using the configuration software, you determine the format of the data. This
assembly instance can be selected to be sent in response to an I/O Poll request
from a Master.
The dynamic Assembly can include all of the measurement values included in
Assembly instance 101. In addition, the dynamic Assembly can include the
following configuration parameters.
28 - 31 Channel 4 Rate of Change value
32 - 35 Channel 5 Temperature Measurement value
36 - 39 Channel 5 Rate of Change value
40 - 43 Channel 6 Temperature Measurement value
44 - 47 Channel 6 Rate of Change value
48 - 51 Channel 1 - Channel 6 Difference
52 - 55 Channel 2 - Channel 1 Difference
56 - 59 Channel 3 - Channel 2 Difference
60 - 63 Channel 4 - Channel 3 Difference
64 - 67 Channel 5 - Channel 4 Difference
68 - 71 Channel 6 - Channel 5 Difference
Table C.13 Instance 103 Data Format (Measurement Values Assembly)
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Table C.14 Instance 199 Component Mapping
EPATH (where ii =
instance number)
Class
Name
Class
Number
Instance
Number
Attribute
Name
Attribute
Number
Data
Type
21 1D 03 24 ii 30 04 Alarm 31D
h
1 - 18 Alarm Enable 4 BOOL
21 1D 03 24 ii 30 07 Alarm 31D
h
1 - 18 Condition 7 USINT
21 1D 03 24 ii 30 08 Alarm 31D
h
1 - 18 Alert Threshold (High) 8 REAL
21 1D 03 24 ii 30 09 Alarm 31D
h
1 - 18 Danger Threshold
(High)
9REAL
21 1D 03 24 ii 30 0A Alarm 31D
h
1 - 18 Alert Threshold Low 10 REAL
21 1D 03 24 ii 30 0B Alarm 31D
h
1 - 18 Danger Threshold Low 11 REAL
21 1D 03 24 ii 30 0C Alarm 31D
h
1 - 18 Hysteresis 12 REAL
21 23 03 24 ii 30 04 Relay 323
h
1 - 8 Relay Enable 4 BOOL
21 23 03 24 ii 30 05 Relay 323
h
1 - 8 Latch Enable 5 BOOL
21 23 03 24 ii 30 06 Relay 323
h
1 - 8 Failsafe Enable 6 BOOL