Manual

Publication GMSI10-UM008D-EN-P - August 2010

Identity Object

(Class ID 01

)

The Identity Object provides identification and general information about the

device.

Class Attributes

The Identity Object provides no class attributes.

Instance Attributes

Status

The Status is a 16 bit value. The following bits are implemented.

Table C.1 Identity Object Instance Attributes

Attr ID

Access

Rule Name Data Type Default Value

1 Get Vendor ID UINT 668 = Entek

2 Get Device Type UINT 109 (Specialty I/O)

3 Get Product Code UINT 24 (0x18) XM-361

26 (0x1A) XM-362

4 Get Revision:

Major

Minor

STRUCT OF

USINT

Value varies with each firmware revision.

5 Get Status WORD

6 Get Serial Number UDINT

7 Get Product Name SHORT_

STRING

"XM-361 Universal Temperature Module"

"XM-362 Isolated Temperature Module"

Table C.2 Identity Object Status

Bit Name Description

0 Owned TRUE indicates that the module has an owner. More

specifically, the Predefined Master/Slave Connection Set

has been allocated to a master.

1 Reserved, set to 0

2 Configured This bit is set whenever a saved configuration is

successfully loaded from non-volatile memory. This bit is

cleared whenever the default configuration is restored or

loaded.

3 Reserved, set to 0