Manual

Publication GMSI10-UM008D-EN-P - August 2010
19
5 RTD 2 (+) No Connection Constant current is sourced to the RTD
Positive voltage across the RTD is measured here
Redundant terminal should remain unterminated
6 RTD 2 (+ No Connection
7 RTD 3 (+) No Connection Constant current is sourced to the RTD
Positive voltage across the RTD is measured here
Redundant terminal should remain unterminated
8 RTD 3 (+) No Connection
9 RTD 4 (+) No Connection Constant current is sourced to the RTD
Positive voltage across the RTD is measured here
Redundant terminal should remain unterminated
10 RTD 4 (+) No Connection
11 RTD 5 (+) No Connection Constant current is sourced to the RTD
Positive voltage across the RTD is measured here
Redundant terminal should remain unterminated
12 RTD 5 (+) No Connection
13 RTD 6 (+) No Connection Constant current is sourced to the RTD
Positive voltage across the RTD is measured here
Redundant terminal should remain unterminated
14 RTD 6 (+) No Connection
15 Chassis Connection to DIN rail ground spring or panel mounting hole
16 4-20 mA 1 (+) 4-20 mA output 1, positive side
17 4-20 mA 2 (+) 4-20 mA output 2, positive side
18 4-20 mA 3 (+) 4-20 mA output 3, positive side
19 TC 1 (+) / RTD 1 (-) TC 1 (+) Positive terminal when channel configured as a
thermocouple input
Negative side of the voltage across the RTD in an RTD
configuration
Positive side of the lead wire detection in a 3-wire RTD
configuration
20 TC 1 (-) / RTD 1 (-) TC 1 (-) Negative terminal when channel configured as a
thermocouple input
Constant current return in an RTD configuration
Negative side of the lead wire detection
21 TC 2 (+) / RTD 2 (-) TC 2 (+) Positive terminal when channel configured as a
thermocouple input
Negative side of the voltage across the RTD in an RTD
configuration
Positive side of the lead wire detection in a 3-wire RTD
configuration
22 TC 2 (-) / RTD 2 (-) TC 2 (-) Negative terminal when channel configured as a
thermocouple input
Constant current return in an RTD configuration
Negative side of the lead wire detection
23 TC 3 (+) / RTD 3 (-) TC 3 (+) Positive terminal when channel configured as a
thermocouple input
Negative side of the voltage across the RTD in an RTD
configuration
Positive side of the lead wire detection in a 3-wire RTD
configuration
Terminal Block Assignments
Name
No. XM-361 XM-362 Description