Manual

Publication GMSI10-UM008D-EN-P - August 2010
100
Services
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
Analog Input Group Object
(Class ID 20
H
)
The Analog Input Group Object binds a group of Analog Input Point
instances together by modeling the set of parameters that are shared by the
Analog Input Point instances.
3 Get Link Path ARRAY of
DeviceNet
path
DeviceNet path to the
object for the Parameter
value.
Segment
Type/Port
BYTE See DeviceNet
Specification Volume 1
Appendix I for format.
Segment
Address
See DeviceNet
Specification Volume 1
Appendix I for format.
4 Get Descriptor WORD Description of Parameter Bit 0 = Settable Path support
Bit 1 = Enum Strings support
Bit 2 = Scaling support
Bit 3 = Scaling Links support
Bit 4 = Read Only
Bit 5 = Monitor
Bit 6 = Ext. Prec. scaling
5 Get Data Type EPATH Data Type Code See DeviceNet Specification
Volume 1 Appendix J, Section
J-6.
6 Get Data Size USINT Number of Bytes in
Parameter value.
Table C.25 Parameter Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
Table C.26 Parameter Object Services
Service
Code Class/Instance Usage Name Description
0E
h
Class/Instance Get_Attribute_Single Returns the contents of the
specified attribute.
10
h
Class Set_Attribute_Single Sets the contents of the
specified attribute.
1