Manual

Publication GMSI10-UM008D-EN-P - August 2010
95
Instances
Instance Attributes
Table C.20 Analog Input Point Object Instances
Instance Name Description
1 Channel 1 Measurements Temperature measurement and Rate of
Change for channel 1.
2 Channel 2 Measurements Temperature measurement and Rate of
Change for channel 2.
3 Channel 3 Measurements Temperature measurement and Rate of
Change for channel 3.
4 Channel 4 Measurements Temperature measurement and Rate of
Change for channel 4.
5 Channel 5 Measurements Temperature measurement and Rate of
Change for channel 5.
6 Channel 6 Measurements Temperature measurement and Rate of
Change for channel 6.
Table C.21 Analog Input Point Object Class Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
3 Get Value REAL
4 Get Status BOOL Indicates if a fault or
alarm has occurred.
0 = Operating without alarms or
faults
1 = Alarm or fault condition
exists. The Value attribute may
not represent the actual field
value.
8 Get Value Data Type USINT Determines the data type
of the Value.
1 = REAL
101 Get/Set Low
Engineering
REAL Low scaling value The measurement value
(measurement units) that
corresponds to the sensor
underrange fault.
103 Get/Set High
Engineering
REAL High scaling value The measurement value
(measurement units) that
corresponds to the sensor
overrange fault.