Manual

Publication GMSI10-UM008D-EN-P - August 2010
92
The dynamic Assembly instance must be instantiated with a call to the class
level Create service. Then the structure can be defined with the
Set_Attribute_Single service for the Member List attribute. Only one dynamic
Attribute instance is supported so subsequent calls to the Create service will
return a Resource Unavailable (0x02) error. The Delete service can be used to
destroy the dynamic Assembly instance so that it can be re-created.
Services
Connection Object
(Class ID 05
H
)
The Connection Object allocates and manages the internal resources
associated with both I/O and Explicit Messaging Connections.
Class Attributes
The Connection Object provides no class attributes.
21 23 03 24 ii 30 07 Relay 323
h
1 - 8 Delay 7 UINT
21 23 03 24 ii 30 09 Relay 323
h
1 - 8 Alarm Level 9 BYTE
21 0F 00 24 ii 30 01 Param 0F
h
7 - 14 Parameter Value
(Alarm Identifier A)
1USINT
21 0F 00 24 ii 30 01 Param 0F
h
15 -22 Parameter Value
(Alarm Identifier B)
1USINT
21 23 03 24 ii 30 0C Relay 323
h
1 - 8 Logic 12 USINT
21 23 03 24 ii 30 0E Relay 323
h
1 - 8 Relay Installed 14 BOOL
Table C.14 Instance 199 Component Mapping
EPATH (where ii =
instance number)
Class
Name
Class
Number
Instance
Number
Attribute
Name
Attribute
Number
Data
Type
Table C.15 Assembly Object Services
Service
Code Class/Instance Usage Name
0E
h
Class/Instance Get_Attribute_Single
10
h
Instance Set_Attribute_Single
08
h
Class Create
09
h
Instance Delete