Instruction Manual

Publication GMSI10-UM005C-EN-P - May 2010
106 DeviceNet Objects
Services
1 Attributes can only be set while the device is in Program Mode. See the description of the Device Mode Object
for more information.
4-20mA Output Object
(Class ID 32A
H
)
The 4-20mA Output Object models the configuration of a 4-20mA output
signal.
Class Attributes
The 4-20mA Output Object provides no class attributes.
11 Get/Set Target Angle REAL The angle of the target
relative to the shaft in
degrees.
0 to 90 degrees
12 Get/Set Upscale BOOL Indicates the movement
of the target relative to
the transducer which is
considered positive
displacement.
0 = Away
1 = Towards
13 Get/Set DC Bias Time
Constant
REAL The time constant value
used for exponential
averaging of the DC Bias
value (a low pass
filter/output smoothing
filter).
Seconds
14 Get/Set Name STRING2 A name to help identify
this transducer or
channel.
18 characters maximum
Table C.38 Transducer Object Instance Attributes
Attr ID
Access
Rule Name Data Type Description Semantics
Table C.39 Transducer Object Services
Service
Code Class/Instance Usage Name Description
0E
h
Instance Get_Attribute_Single Returns a single attribute.
10
h
Instance Set_Attribute_Single
Sets a single attribute.
1