Owner manual

Publication GMSI10-UM001C-EN-E - June 2011
10 Installing the XM-720 Machine Monitor
Package Contents
The XM-720 monitor is shipped with the following items:
• Monitor
Table 2.1 XM-720 Monitor
• USB-style RS-232 serial cable
• XM Documentation and Configuration Utility CD-ROM disk, which
contains the manuals, XM Serial Configuration Utility software,
Hazardous Locations installation drawings, and XM-720 configuration
files.
• Meter caption sheet
• Mounting template sheet
Installation Guidelines
Selecting a Location for the XM-720 Monitor
The XM-720 monitor is designed for panel mounting in a control room or
local mounting in an enclosure for ready access to the front panel by operating
personnel. When selecting a location for the monitor, keep in mind that it is a
complex electronic device. It is designed and manufactured to withstand quite
severe environmental conditions, but as with any electronic equipment, it will
give the longest, trouble-free service if treated with care.
The selected location should not subject the monitor to dripping water from
above, or to heat from equipment installed beneath it.
Cat. No. XM Measurement Module
1440-PK02-05M0 XM-120 Standard Dynamic Vibration Module
1440-PK02-05M1 XM-121 Low Frequency Dynamic Vibration Module
1440-PK02-05M2 XM-122 gSE™ Vibration Module
IMPORTANT
This product is an open type component and shall be
installed in a suitable grounded enclosure accepted by local
authority having jurisdiction.