Manual

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 99
Chapter 6
Logging
This section describes the functions of the PowerMonitor 5000 unit. Most
functions require you to configure set-up parameters to align the unit with your
installation and your application requirements. The set-up parameters are listed
by name and described in this section. You can view set-up parameters by using
the PowerMonitor 5000 web page, and when logged in to an Admin account,
make changes to the setup. Set-up parameters are also accessible by using
communication.
Please refer to the Data Tables for additional information on setup parameters
including the following:
• Range of valid values
• Default values
• Data type
Set-up parameters can be found in data tables with names beginning with
‘Configuration’, for instance Configuration.Metering_Basic.
Topic Page
Logging Overview 100
Waveform Log (M6 Model) 105
Energy Log 109
Data Log 113
Min/Max Log 123
Load Factor Log 126
Time-of-use (TOU) Log 128
Event Log 130
Setpoint Log 134
Alarm Log 136
Power Quality Log (M6 model) 141
Trigger Data Log (M6 model) 145
Snapshot Log 148