Manual

34 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 2 Install the PowerMonitor 5000 Unit
Configure the Connection
Follow these steps to configure the connection.
1. From the Windows desktop, choose Start > Settings > Network
Connections.
A new Local Area Connection with a Device Name ‘Remote NDIS based
Device’ was added when you installed the driver.
2. Right-click the connection name and choose Properties.
TIP
Setting up a PanelView 6 terminal in Windows CE follows a similar process.
Please refer to the Rockwell Automation Knowledgebase answer ID 115608 or
455067 if you need further details.