Manual

32 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 2 Install the PowerMonitor 5000 Unit
Install Drivers
Yo u can down loa d dr i vers fro m
http://www.rockwellautomation.com/compatibility
.
Follow the steps listed below to install the USB driver.
1. Connect the PowerMonitor 5000 unit to your computer with a USB cable
and apply power to the power monitor.
The computer detects the new device and prompts you to install the driver.
2. Click ‘Yes, this time only’ and click Next.
3. Click Install from a list or specific location (Advanced) and click Next.