Manual

Rockwell Automation Publication 1426-UM001F-EN-P - November 2013 169
Logic Functions Chapter 7
Command Word 2
Set this command word value to execute the listed action. These are the
selections:
6 = Clear Setpoint Log
7 = Clear Setpoint (Time) Accumulators
18 = Clear Setpoint Logic Gate (Time) Accumulators
Clear Setpoint Accumulators operates by using the value contained in the tag
listed below. The default value is zero.
Clear Single Setpoint or Logic Gate Accumulator
0 = Clear all time accumulators
1…20 = Clear selected time accumulator
Related Functions
• Basic Metering
• Status Inputs
• KYZ and Relay Outputs
• Power Quality Monitoring