Manual

166 Rockwell Automation Publication 1426-UM001F-EN-P - November 2013
Chapter 7 Logic Functions
76 I4_IEC_THD_% % 0.00…100.00
77 Avg_IEC_THD_I_% % 0.00…100.00
78 I1_K_Factor KF 0.00…1.00
79 I2_K_Factor KF 0.00…1.00
80 I3_K_Factor KF 0.00…1.00
81 Pos_Seq_Volts V 0…9.999E15
82 Neg_Seq_Volts V 0…9.999E15
83 Zero_Seq_Volts V 0…9.999E15
84 Pos_Seq_Amps A 0…9.999E15
85 Neg_Seq_Amps A 0…9.999E15
86 Zero_Seq_Amps A 0…9.999E15
87 Voltage_Unbalance_% % 0.00…100.00
88 Current_Unbalance_% % 0.00…100.00
89 kW Demand kW ±0.000…9,999,999
90 kVAR Demand kVAR ±0.000…9,999,999
91 kVA Demand kVA 0.000…9,999,999
92 Demand PF PF -100.0…100.0
93 Demand Amperes A 0.000…9,999,999
94 Projected_kW_Demand kW ±0.000…9,999,999
95 Projected_kVAR_Demand kVAR ±0.000…9,999,999
96 Projected_kVA_Demand kVA 0.000…9,999,999
97 Projected_Ampere_Demand A 0.000…9,999,999
98 Status_Input_1_Actuated 0 or 1
99 Status_Input_2_Actuated 0 or 1
100 Status_Input_3_Actuated 0 or 1
101 Status_Input_4_Actuated 0 or 1
102 Log_Status Bit field
(1)
103 PowerQuality_Status Bit field
(1)
104 Over_Range_Information Bit field
(1)
105 Metering_Status Bit field
(1)
(1) See Status.Alarms Data Table on page 302.
Table 28 - Setpoint Parameter Selection List
Parameter Number Parameter Tag Name Units Range