Installation Instructions User Manual

Rockwell Automation Publication 1426-IN005A-EN-P - December 2013 5
PowerMonitor 5000 Unit Catalog Number Upgrade
7. In RSLinx software, navigate to the IP address of the device over the
Ethernet network, select the device, and click OK.
To upgrade the catalog number over the ControlNet or DeviceNet
network, navigate to the device through the network scanner in the RSLinx
software window.
To upgrade the catalog number via a USB connection, an RNDIS driver
must be installed. Refer to the PowerMonitor 5000 USB Driver
Installation and Configuration Installation Instructions, publication
1426
-IN001, for directions on installing the driver.
TIP
RSLinx Classic Lite software must be installed to continue with the upgrade
process.