Manual

Publication 1413-UM001C-EN-P - May 2006
36 Installation
F10 navigates to the first Extended Configuration screen. This
screen operates in the same way as the initial configuration
screen.
The controller tags available on the Configuration screen are shown
below in their relative location on the screen.
12. Press F10 to navigate to the Extended Configuration 2 screen
from the Extended Configuration 1 screen.
The controller tags available on the Configuration screen are shown
below in their relative location on the screen.
NominalVoltage Nominal_Voltage_Scale Bus_Volts PF_inRange_Timer_Preset
VoltageRange InRangeTimerPreset Unbalanced_Limit
HighLimit HighLimitTimerPreset %THD_V_SetPoint Net_Current
LowLimit LowLimitTimerPreset %THD_Timer_Preset Unbalance_Timer_Preset
Number of Samples CTPT Mode Powermonitor Heartbeat
Step Tolerance Low Limit Input Mode Disable/Enable
Step Tolerance Time Restore Defaults
Powermonitor Password Kvar Tolerance Disable/Enable