Manual

Publication 1413-UM001C-EN-P - May 2006
34 Installation
2. Press F10 to view the Configuration screen from the Menu.
The controller tags available on the Configuration screen are shown
below in their relative location on the screen.
3. Press the Direction keys to move the cursor over the desired
field and press the Enter key.
4. Enter the desired value using the keypad and press Enter to
store the new value.
Pressing the Backspace key cancels a change.
Num_Steps StepsActive Eff_StepSize_S1 Eff_StepSize_S6
Eff_StepSize_S2 Eff_StepSize_S7
Num_PMs DischgTimerPreset Eff_StepSize_S3 Eff_StepSize_S8
Eff_StepSize_S4 Eff_StepSize_S9
kVAR_Lead_DB kVAR_Lag_DB Eff_StepSize_S5 Eff_StepSize_S10
Mode Auto_Detect_Cap_Size
Initialize_Step_Buffer