Operating Handle User guide

Installation Instructions
WARNING: To prevent electrical shock, disconnect from power source before installing or servicing. Follow NFPA 70E requirements. Install in suitable enclosure. Keep free from
contaminants.
Installation, adjustments, putting into service, use, assembly, disassembly, and maintenance shall be carried out by suitably trained personnel in accordance with applicable code of
practice. In case of malfunction or damage, no attempts at repair should be made.
Operating Shaft Modication
C
MIN
with Bracket = 296 mm (11-11/16 in)
C
MIN
without Bracket = 220 mm (8-11/16 in)
2
1
C
-
122.9
(C
-
4-27/32)
3
(1/8)
6.35
(1/4)
Ø 3
(Ø 1/8)
3
mm
(in.)
Bulletin 140U NFPA 79 Internal Rotary Operating Handle Kit
(Cat 140U-J-_ _ _)
C