User Manual, PRIOR to Firmware rev. 3.0 Owner manual

Publication 1404-UM001D-EN-E - October 2004

3-20 Powermonitor 3000 Operations

3. Choose the option of the command by pressing the Up Arrow

and Down Arrow keys until the desired option is displayed.

Notice the phase indicators on the right-hand side remain solid

and the command option being selected is still flashing.

Figure 3.7 Command Option

4. After the desired command option is displayed, press the Enter

key to execute the command. The selection prompt reappears

and the Display Module is set back to Program mode. Notice the

phase indicators on the right-hand side are flashing again and

the option prompt is now solid.

Figure 3.8 Program Mode

5. To abort a command, press the Escape key. The Display Module

returns to Program mode and the option prompt is displayed

again. Notice the phase indicators on the right-hand side are

now flashing and the option prompt is now solid.

wermonitor 3000

Powermonitor 3000