User Manual, PRIOR to Firmware rev. 3.0 Owner manual

Publication 1404-UM001D-EN-E - October 2004
4 Index
semantics F-12
O
operation
editing a digital parameter
3-17
oscillography 8-1
configuring 8-1
reading data 8-4
other precautions 1-2
over forward setpoint 5-2
over reverse setpoint 5-3
P
PCCC Object
class attributes
F-8
class specific service F-9
common services F-8
instance attributes F-8
supported commands F-11
performance features 2-4
power factor results 3-7
power results 3-6
power up 3-16
Powermonitor 3000 operations 3-1
Powermonitor 3000 web access 4-45
product approvals D-1
ANSI/IEEE tested D-3
CE certification D-2
ControlNet conformance testing D-1
EMC directive D-2
EtherNet/IP conformance testing D-1
IEC529/NEMA/UL 508 D-2
low voltage directive D-2
UL/CUL D-2
product description 2-1
projected demand calculation 3-10
first order projection 3-11
instantaneous 3-10
second order projection 3-11
pulsed control 6-2
R
reading harmonic analysis data 8-11
reading individual harmonic values 8-12
reading time of use log 7-18
reading transient analysis 8-20
reading transient capture 8-21
relay and KYZ output operation 6-1
communications loss behavior 6-4
descrete I/O control 6-3
forced operation 6-3
no control operation 6-3
pulsed control 6-2
setpoint control 6-3
Remote I/O 4-5
led indicators 2-11
performance features 2-6
RS-232 4-3
led indicators 2-11
performance features 2-6
RS-485 4-2
led indicators 2-10
performance features 2-5
RSNetWorx for DeviceNet 4-8
S
safety considerations 1-1
sag and swell 8-13
sample applications C-1
scrolling 3-17
serial communications 4-24
auto sense protocol 4-29
DF1 protocol 4-25
Modbus RTU slave protocol 4-26
setpoint control 6-3
setpoint inputs 6-5
setpoint programming and operation 5-1
equal 5-5
not equal 5-5
over forward 5-2
over reverse 5-3
under forward 5-3
under reverse 5-4
setting default screen 3-18
simple reads of data tables 4-21
SNTP client F-15
configuration parameters F-15
specifications D-1, D-3
control relay D-4
general input, output and environmental
ratings
D-4
input and output ratings D-4
measurement accuracy, resolution, and
range
D-3
relay life D-4
status input operations 6-5
counters 6-5
demand period synchronization 6-5
event logging of status inputs 6-6
setpoint inputs 6-5