User Manual, PRIOR to Firmware rev. 3.0 Owner manual

Publication 1404-UM001D-EN-E - October 2004

G-2 Powermonitor 3000 ControlNet Device Profile

Identity Object

The Identity Object is used to provide identification information about

the device. The Powermonitor 3000 system supports two instances of

the identity object to provide identity information about the PM 3000

itself as well as the DC.

Section 5-2 of the CIP Common Specification provides additional

details about this object.

Class Attributes

Instance Attributes

Assembly Connection or Message Router

PCCC Message Router

NVS Message Router

Table G.2 Interface

Object Interface

Class Code: 01

hex

Table G.3 Class Attributes

Attr

Acces

Name Data Type Default

Value

0x01 Get Revision UINT 1

0x02 Get Max Instance UINT 2

0x06 Get Max Class Attribute UINT 7

0x07 Get Max Instance Attribute UINT 7

Table G.4 Instance Attributes

Attr

Acces

Name Data Type

0x01 Get Vendor ID UINT

0x02 Get Device Type UINT

0x03 Get Product Code UINT

0x04 Get Revision Struct of: