User Manual, PRIOR to Firmware rev. 3.0 Owner manual

Publication 1404-UM001D-EN-E - October 2004
F-14 Powermonitor 3000 EtherNet/IP Device Profile
Transfer Service Parameters
The Transfer service is sent repeatedly by a remote application to
transfer the actual update data to the DC a chunk at a time. The
service accepts the following parameters:
The DC responds to the Transfer service with the following
parameters:
NVS Object Instances
The DC’s NVS Object will support the following instances:
Table F.28 Response Parameters
Parameter Data Type Description
Boot Update
Flag
UINT Indicates if the Boot Code is to be updated.
Incremental
Burn
UINT Number of chunks transferred prior to being programmed.
Transfer Size UINT Chunk size for the transfers. (128 bytes)
Instance
Revision
UINT Major and minor revision of the firmware or data
represented by this instance
Upload Size UDINT Size of the upload in bytes.
Table F.29 Request Parameters
Parameter Data Type Description
Chunk Number UDINT Number of chunks transferred (0 based)
Data Array of
Bytes
Data representing the new firmware
Table F.30 Response Parameters
Parameter Data Type Description
Chunk Number UDINT Same as request
Status UINT Status instance attribute