User Manual, PRIOR to Firmware rev. 3.0 Owner manual

Publication 1404-UM001D-EN-E - October 2004
F-2 Powermonitor 3000 EtherNet/IP Device Profile
The objects within the Powermonitor 3000 system have the following
interfaces:
Identity Object
The Identity Object is used to provide identification information about
the device. The Powermonitor 3000 system supports two instances of
the identity object to provide identity information about the PM 3000
itself as well as the DC.
Section 5-2 of the CIP Common Specification provides additional
details about this object.
Class Attributes
Table F.2
Object Interface
Identity Message Router
Assembly Connection or Message Router
PCCC Message Router
NVS Message Router
Table F.3
Class Code: 01
hex
Table F.4
Attr
ID
Acces
s
Name Data Type Default
Value
0x01 Get Revision UINT 1
0x02 Get Max Instance UINT 2
0x06 Get Max Class Attribute UINT 7
0x07 Get Max Instance Attribute UINT 7