Installation Instructions, PRIOR to Firmware rev. 3.0 Manual

Publication 1404-IN007D-EN-P - October 2004
Powermonitor 3000 3
European Communities (EC)
Directive Compliance
If this product has the CE mark, it is approved for installation within
the European Union and EEA regions. It has been designed and tested
to meet the following directives.
EMC Directive
This product is tested to meet the Council Directive 89/336/EEC
Electromagnetic Compatibility (EMC) by applying the following
standards, in whole or in part, documented in a technical construction
file:
• EN 50081-2 EMC — Generic Emission Standard, Part 2 —
Industrial Environment
• EN 50082-2 EMC — Generic Immunity Standard, Part 2 —
Industrial Environment
This product is intended for use in an industrial environment.
Low Voltage Directive
This product is tested to meet Council Directive 73/23/EEC Low
Voltage, by applying the safety requirements of IEC 1010-1, Safety
Requirements for Electrical Equipment for Measurement, Control, and
Laboratory Use.
This equipment is classified as an open style device. Open style
devices must be provided with environmental and safety protection
by proper mounting in enclosures designed for specific application
conditions. See NEMA Standards publication 250 and IEC publication
529, as applicable, for explanations of the degrees of protection
provided by different types of enclosure.