Installation Instructions, PRIOR to Firmware rev. 3.0 Manual

Publication 1404-IN007D-EN-P - October 2004

12 Powermonitor 3000

Table 7 Native RS-485 Communications only (catalog numbers ending in -000)

LED LED Color LED State and Communications

Condition

F1 Off Not Used

F2 Off Not Used

F3 Off Not Used

Table 8 RS-232 Optional Communications (catalog numbers ending in -232)

LED LED Color LED State and Communications

Condition

F1 Off Not Used

RS-232 RX Off The RS-232 bus is idle; no active data is

present

Flashing Green Powermonitor 3000 is receiving data.

RS-232 TX Off The Powermonitor 3000 is not transmitting

any data onto the RS-232 bus

Flashing Green The Powermonitor 3000 is transmitting

data.

Table 9 Remote I/O Optional Communications (catalog numbers ending in -RIO)

LED LED Color LED State and Communications

Condition

F1 Off Not Used

F2 Off Not Used

R I/O Off Remote I/O communications has not been

established

Flashing Green Remote I/O communications has been

established but there are errors

Steady Green Remote I/O communications has been

established

Powermonitor 3000

}

RS-232

Powermonitor 3000

R I/O