Installation Instructions Owner's manual

Publication 1403-IN005A-EN-P
B-6 Ethernet Communication Card Data Tables
NOTE
The device does not respond to a broadcast of this table. IP
addresses are stored as a.b.c.d (e.g. 128.1.1.1; a=128).
Table B.4 Communications Configuration Table - Write and Read (File N12)
Parameter
No.
Parameter Name Master Module Range Default Element Range
2.1 IP Address Byte a 0 to 255 128 1 0 to 255
2.2 IP Address Byte b 0 to 255 1 2 0 to 255
2.3 IP Address Byte c 0 to 255 1 3 0 to 255
2.4 IP Address Byte d 0 to 255 Unit ID 4 0 to 255
2.5 Reserved 0 0 5 0
2.6 Reserved 0 0 6 0
2.7 Reserved 0 0 7 0
2.8 Reserved 0 0 8 0
2.9 Subnet Mask Byte a 0 to 255 255 9 0 to 255
2.10 Subnet Mask Byte b 0 to 255 255 10 0 to 255
2.11 Subnet Mask Byte c 0 to 255 255 11 0 to 255
2.12 Subnet Mask Byte d 0 to 255 0 12 0 to 255
2.13 Physical Ethernet Port 0 = UTP, 1 = AUI 0 13 0 to 1
2.14 Keep Alive Time 5 to 3600 Seconds 30 14 5 to 3600
2.15 Inactivity Time 0 to 1440 Minutes 30 15 0 to 1440
2.16 Reserved 0 0 16 0
2.17 Reserved 0 0 17 0
2.18 Reserved 0 0 18 0
2.19 Reserved 0 0 19 0
2.20 Reserved 0 0 20 0
2.21 Present Unit Password -1 is always returned for
a Read
0 to 9999 is required for a
Write
-1 (Read) 21 -1 to +9999
Reserved 0 0 22 0
Reserved 0 0 23 0
Reserved 0 0 24 0
Reserved 0 0 25 0
Reserved 0 0 26 0
Reserved 0 0 27 0
Reserved 0 0 28 0
Reserved 0 0 29 0
Reserved 0 0 30 0