Installation Instructions Manual

Publication 1403-IN054B-EN-P - August 2001
DeviceNet Data Tables B-39
Instance 33 Attributes (Read of Event log configuration)
Assembly Structure
Common Services
Instance 34 Attributes (Event log results)
Assembly Structure
Attribute ID Access
Rule
Name DeviceNet Data Type
3 Get Data Structure of
4 bytes (2 Words)
Param # Parameter name Data type #bytes Master Module Range Default
Setting
Word
No.
1 Enable/disable save of
status input changes to
event log
Int 2 0 = disable
1 = enable
01
2 Number of events in the
event log
Int 2 0 - 100 2
Service
Code
Service Name
0Ehex Get_Attributes_Single
Attribute ID Access
Rule
Name DeviceNet Data Type
3 Get Data Structure of
30 bytes (15 Words)
Param # Parameter name Data type #bytes Master Module Range Word No.
1 Timestamp when event occurred Int x 4 8 Year 1
Month Day 2
Hour Minute 3
Second Hundredths 4
2 Event log # being returned Int 2 1 to 100 5
3 Number of event in event log Int 2 0 - 100 6
4 Event type Int 2 0 to 14 7
5 Event code Int 2 0 to 10 8
6 Setpoint type Int 2 0 to 54 9
7 Setpoint evaluation condition Int 2 0 to 5 10
8 Setpoint level (integer value) Int 2
±9999x10
21
If limit stored in event log is a float value,
this returns to 0.
11
9 Setpoint action/release delay Int 2 0 to 9999 12