Installation Instructions Manual

Publication 1403-IN054B-EN-P - August 2001
DeviceNet Data Tables B-35
Instance 29 Attributes (Min/max configuration/readback
parameter select)
Assembly Structure
Common Services
Attribute
ID
Access
Rule
Name DeviceNet
Data Type
3 Set Data Structure of
8 bytes (4 Words)
Param # Parameter name Data type #bytes Master Module Range Default
Setting
Word
No.
1 Password Int 2 -1, 0-9999
Correct password is required to
configure/reconfigure min/max functionality,
but not required to select a min/max record
to be read back in the min/max read
assembly. If the user is only selecting a
min/max record to be read, set password to –
1.
01
2 Min/max parameter
record to be read
Int 2 1 to 84
Specifies a specific min/max record to be
read.
2
3 Enable/disable
min/max log
Int 2 0 = Disable
1 = Enable
13
4 Clear min/max log Int 2 Write a 1 here to clear the min/max log;
otherwise write a 0.
4
Service
Code
Service Name
10hex Set_Attributes_Single