Installation Instructions Manual

Publication 1403-IN054B-EN-P - August 2001
DeviceNet Data Tables B-5
Instance 2 Attributes (Output Data Assembly)
Assembly Structure
Common Services
Instance 3 Attributes (Input Configuration Data Write)
Assembly Structure
Attribute ID Access
Rule
Name DeviceNet Data
Typ e
3 Set Data Structure of
4 bytes (32 Bits)
Param # Parameter name Data
type
#bytes Word No.
1 Reserved Int 2 1
2 Reserved Int 2 2
Service
Code
Service Name
10
hex Set_Attributes_Single
Attribute ID Access
Rule
Name DeviceNet Data Type
3 Set Data Structure of
52 bytes (104 Bits)
Param # Parameter name Data type #bytes Comment Word
No.
1 Present unit password Int 2 Current PMII password 1
2 Channel # to configure Int 2 Valid channel numbers at this time are 1 and 49. 2
3 Total parameters in channel Int 2 Total number of parameters in the newly configured
channel.
3
4 Total words in channel Int 2 Total number of words in the newly configured
channel. This should match the total number of words
for all parameters. Max of 64 words
4
5 Selection for parameter #1 Int 2 0-65535 indicates the parameter the user selected to
appear in the channel as parameter #1. A list of
parameters can be found in table “Configurable
channel parameter list” on page B-61
5
6 Selection for parameter #2 Int 2 See “Configurable channel parameter list” on page 61. 6
7 Selection for parameter #3 Int 2 See “Configurable channel parameter list” on page 61. 7
8 Selection for parameter #4 Int 2 See “Configurable channel parameter list” on page 61. 8
9 Selection for parameter #5 Int 2 See “Configurable channel parameter list” on page 61. 9
10 Selection for parameter #6 Int 2 See “Configurable channel parameter list” on page 61. 10
11 Selection for parameter #7 Int 2 See “Configurable channel parameter list” on page 61. 11
12 Selection for parameter #8 Int 2 See “Configurable channel parameter list” on page 61. 12