Instruction Manual

310 Variables and Flags Assignment and Request Commands System
Publication 1398-PM601A-EN-P October 2000
HOST MODE
ACTIVESN Indicates the number of scanned events active.
Bit
Description
0 No scanned events executing
1 to 8 Number of scanned events active
VRN
ACTIVEXN Indicates the number of Xkey routines active.
Bit
Description
0 No Xkey routines executing
1 to 4 Number of Xkey routines active
VRN
AUXID Returns a byte value indicating the option board
type attached to the ULTRA Plus or IQ.
BIT
Description
0 No option board present
1 I/O and Memory expansion board
2 I/O expansion only
3 Reserved for future expanded capabilities
4 Reserved for future expanded capabilities
byte R N
CF Access the current run-time feedback configura-
tion. Configuration is automatically set to 1 on
power-up. The value must be in the range 14.
(See CF1, CF2, CF3, CF4.)
byteR/WN
DM Drive Peak Current. For anULTRA Plus or IQ-
Series Positioning Drive Module, this value is the
peak current rating in Amps. For an IQ-550, this
value represents the drive peak current in Amps
for a 10 V ICMD output. This value is set up
using the IQPMGEN program.
VRY
ENUM
WNUM
Read-only variables which reflect the value
latched upon receipt of the last status (S) com-
mand. If the status command indicated that a error
or warning was active, these commands may be
used to get the actual error number. The value
returned will be in the range 0..74. (See S, FTXT
in the appendix Error Messages on page 418)
byte
ESIZE Number of Encoder Lines (counts per rev divided
by 4). For an IQ-550, this value is set up using the
IQPMGEN program.
VRY
FDR Default Feedrate value. V R/W Y #
FEL Following Error Limit. V R/W Y #
FET Following Error Time. V R/W Y #
FLIMIT Forward travel limit. V R/W Y #
FLTDIS TRUE to disable some faults. F R/W Y
FTXT This query command will return a quoted text
string for the error or warning number specified.
The number must be in the range 0..74. (See
ENUM, WNUM.)
string R N/A
GTERM TRUE if generic operator terminal is selected. F R/W Y