User Manual

Dimensional Data

Intro

SHAFT END PLAY UNDER LOAD SHAFT END THREADED HOLE

Maximum end play (All Motors)

Direction mm/in Motor Series Load (Kg/Lb) Motor Series Thread Thread/Depth

---> 0.025/0.001 H-2000/H-3000 4.54/10.0 H-2000 M3 x 0.5MM 10mm / 0.39in

H-4000 9.09/20.0 H-3000 M4 x 0.7MM

<--- 0.025/0.001 H-6000/H-8000 22.7/50 H-4000 M6 x 1.0MM 15mm / 0.59in

H-6000 M8 x 1.25MM 20mm / 0.79in

H-8000

Note: End play and load are measured in inches and pounds. Metric measurements

are approximate conversions from inches and pounds.

Note: Motors are manufactured to millimeter dimensions. Inch dimensions

are approximate conversions from millimeters.

FEEDBACK CONNECTOR

SHAFT END THREADED HOLE

MOTOR CONNECTOR

BF DIA HOLES ON

AJ BOLT CIRCLE