User Manual

Publication 1398-5.0 – October 1998
List of Figures
IntroList of Figures
Product Parts Explained .....................Intro-21
Chapter 1
Safety
Chapter 2 Selecting Other System Components
Chapter 3 ULTRA Master Installation
Chapter 4 Unpacking, Inspecting and Storing
Connection Diagram
...........................4-4
Chapter 5
Installation
1398-DDM Mounting Dimensions (sheet 1 of 2)
...........5-3
MDF AC Line Filter Mounting Diagrams
..............5-8
MIF Single Phase AC Line Filter Mounting Diagram
.......5-10
Power Wiring Diagrams
(sheet 1 of 3)
................5-11
Chapter 6
Interfaces
Digital Input Circuit
...........................6-4
Drive Input Connected to a Switch/Relay Contact
.........6-7
Drive Input Connected to an Opto-Isolator
..............6-7
Drive Input Connected to an Active High Sourcing Transistor
..6-7
Drive Input Connected to Active Low Output using
a Switch/Relay
............................6-7
Drive Input Connected to Active Low Output using
an Opto-Isolator
...........................6-8
Drive Input Connected to Sourcing Output
.............6-8
READY and BRAKE Circuits
......................6-9
Digital Output Circuit
.........................6-10
Drive Output Connected to an Opto-Isolator
............6-11
Drive Output Connected to an LED Indicator
...........6-12
Drive Output Connected to a Resistive Load
............6-12
Drive Output Connected to a Switch/Relay
............6-12
Drive Output Connected to Active Low Input using
a Switch/Relay ...........................6-13
Drive Output Connected to Active Low Input using
an Opto-Isolator ..........................6-13
Drive Output Connected to Active High (Sinking) Input .....6-13
Positive and Negative Current Limit Circuits ...........6-14
Analog COMMAND Input Circuit .................6-15
ANALOG 1 and ANALOG 2 Output Circuits ...........6-16
Output Encoder Interface Circuit ..................6-17
Auxiliary Encoder Input Types ...................6-19
Auxiliary Encoder Input Circuit ...................6-19