Installation Manual User guide

Publication 1398-5.2 – PDF 1997
List of Figures
IntroList of Figures
Product Parts Explained .....................Intro-25
Chapter 1
Safety
Chapter 2 Unpacking, Inspecting and Storing
Host Mode Connection Diagram
....................2-3
Chapter 3
Selecting Other System Components
Chapter 4 ULTRA Master Installation
Chapter 5 Installation
1398-DDM-005 and -005X Mounting Dimensions
..........5-3
1398-DDM-009 and -009X, 1398-DDM-019 and -019X Mounting Dimensions
5-4
MIF Single Phase AC Line Filter Mounting Diagram
........5-9
Power Wiring Diagram
........................5-11
Chapter 6
Interfaces
Digital Input Circuit
...........................6-3
Drive Input Connected to a Switch/Relay Contact
.........6-6
Drive Input Connected to an Opto-Isolator
..............6-6
Drive Input Connected to an Active High Sourcing Transistor
..6-6
Drive Input Connected to Active Low Output
using a Switch/Relay
........................6-7
Drive Input Connected to Active Low Output
using an Opto-Isolator
........................6-7
Drive Input Connected to Sourcing Output
.............6-7
READY and BRAKE/DRIVE ENABLED Circuits
..........6-9
Digital Output Circuit
..........................6-9
BRAKE/DRIVE ENABLE Application Examples
.........6-10
Drive Output Connected to an Opto-Isolator
............6-12
Drive Output Connected to an LED Indicator
...........6-12
Drive Output Connected to a Resistive Load ............6-12
Drive Output Connected to a Switch/Relay ............6-13
Drive Output Connected to Active Low Input
using a Switch/Relay .......................6-13
Drive Output Connected to Active Low Input
using an Opto-Isolator .......................6-13
Drive Output Connected to Active High (Sinking) Input .....6-14
External Current Limit Circuit ....................6-14
Analog COMMAND Input Circuit .................6-15
ANALOG 1 Output Circuit ......................6-15
Output Encoder Interface Circuits ..................6-17