Installation Manual User guide

Publication 1398-5.2 – PDF 1997
2-8 Unpacking, Inspecting and Storing
A drive completing these steps is functional. If the ULTRA 100 Series
drive did not pass the steps above, refer to “Troubleshooting” on
page 11-3.
Storing the Unit
Return the drive to its shipping carton using the original packing
materials to enclose the unit.
Store the drive in a clean, dry place that will not exceed the following
ranges:
● Humidity: 5% to 95%, non-condensing
● Storage temperature: -40° to 158° Fahrenheit (-40° to 70°
Celsius).
Note: For information on testing the digital and analog signals refer to
“Testing Digital Outputs” on page 11-9, “Testing Digital Inputs” on
page 11-11, “Testing Analog Output” on page 11-11 and “Testing Ana-
log Input” on page 11-12.