Installation Manual User guide

Publication 1398-5.2 – PDF 1997
Index-4
Overview
3-7
Phase Connections 7-2
Power
Cabling
7-2
Troubleshooting
Encoder Error
11-6
Motor Information Missing 11-7
Overspeed 11-6
Overtemperature 11-4
Thermal Protection Fault 11-6
Mounting Requirements 5-1
O
Operating Temperature G-1
Options A-1
Output Current
Continuous (peak)
G-5
Peak G-5
P
Part Numbers A-1
AC Line Filters A-2
Cables B-3
Encoder Cables A-3, B-14
Fuses A-1
Interface Cables A-1
Manuals A-2
Mating Connectors A-6
Motor Power Cables A-4, B-21
Serial Interface Cables A-3, B-13
Shunt Resistor A-2
Terminal Strip A-2
TouchPad A-2
PC Display Units Dialog 8-50
P-gain
Defined
9-7
Position Follower
Master Encoder
8-12
Step Up/Down 8-24
Step/Direction 8-18
Position Regulation G-2
Power
Input Frequency
7-7
Output
Continuous
G-5
Peak G-5
Protection 7-5
Ratings G-5
Source Separation 7-8
Supply 7-5
Preset Binary Inputs
Programmable Speed Inputs
8-6
Preset Controller
Configuration Example
8-6
Protection Circuitry 7-5
Motor Overload 7-4
Publications
Related
Intro-21
R
Readme File 4-5
READY G-2
Registration Indexing 8-37
Requirements
AC Input Current
7-8
I/O Power
External
6-1
Input Power 7-8
Transformer 7-8
Wire Size 7-8
Revision Level
Software
4-4
Ripple
Speed Regulation
G-2
RS-232
Multiple Axes Set-up
6-38
Single Axis Set-up 6-34
Troubleshooting 11-8
RS-485
Multiple Axes Set-up
6-35
Run Time
Error Codes
10-1
Faults G-4
S
Safety
Guidelines
1-1
Safety Notes
User Responsibilities
1-1
Sample Applications
Absolute Indexing
8-43
Analog Controller 8-1
Incremental Indexing 8-30
Modifying User Units 8-50
Position Follower
Master Encoder
8-12
Step Up/Down 8-24
Step/Direction 8-18
Preset Controller 8-6
Registration Indexing 8-37
Selectable I/O G-1, G-2
Digital Inputs G-4
Digital Outputs G-4
Self-Test C-2
Separation of Power Sources 7-8
Serial Communications
Drive Addressing
6-33, 6-34
RS-232 Multiple Axes 6-38
RS-232 Single Axis 6-34
RS-485 Multiple Axes 6-35
Hardware Addressing 6-33
Overview 3-3