Installation Manual User guide

Publication 1398-5.2 – PDF 1997
C-8 TouchPad Instructions
● A filled arrow, , in the most significant digit indicates the active
setting from a list of possible settings. Inactive settings are
indicated by a unfilled arrow, .
For example: If the drive is functioning as Preset Controller in the
Velocity mode, pressing the key from DRVPARAM scrolls
through the
CmdSrc list which includes Presets, AuxEnc,
StepDir, StepU/D, and Analog.
● The Mode/Enter, , key selects a parameter from the list.
● List selections that are undefined are indicated by Unknown.
This display indicates the TouchPad data table is incompatible
with the drive.
Lists are associated with all parameters, except
DISPLAY and
DRVINFO. Refer to the tables beginning on page C-16 for the items in
each list. Table C.17, “Drive Status List for TouchPad” on page C-19
is a read-only list, all other lists contain possible parameter selections.
After an option is selected, the display reverts to the parameter from
which the option was selected. For example: Selection of the
EncAlign parameter under STATUS provides the options Normal
and Align. Selection of either option returns you to the EncAlign
display.
Ratio
A
FolRatio (gear ratio) longer than eight characters may require
scrolling with the and keys. The ratios are numeric values that
increment or decrement by 1 each time the , or , key is pressed.
The method of display is dependent on the length of the ratios:
● If the ratio is eight characters or less, the complete ratio is
displayed.
For example, a Master to Follower ratio of one-thousand to nine-
hundred is displayed as
1000:900.
● If the ratio requires more than eight characters the ratio is
displayed in two parts: a Master Ratio and a Follower Ratio. The
position of the colon (:) after or before each numeric value
indicates Master or Follower for these larger ratios.
The and keys toggle between the Master Ratio and the
Follower Ratio.
For example: A Master to Follower ratio on 1001:1000 is
displayed in two separate displays. The Master Ratio is displayed
as
1001: and pressing displays the Follower Ratio :1000.
Fault/Error/Warning
C.1lists the possible fault, error and warning messages that may
appear on the TouchPad. The items below describe the different types
of messages.