Instruction Manual

5–86 Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 2 Text 5] — P.263
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value 127
[Process 2 Text 6] — P.264
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value 127
[Process 2 Text 7] — P.265
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value 127
[Process 2 Text 8] — P.266
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 32
Maximum Value 127