Instruction Manual

5–85Programming Parameters
Publication 1397-5.0 — June, 2001
Process Display
[Process 2 Text 1] — P.259
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 65
Maximum Value 127
[Process 2 Text 2] — P.260
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 109
Maximum Value 127
[Process 2 Text 3] — P.261
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 112
Maximum Value 127
[Process 2 Text 4] — P.262
Sets the “User Units” description for the value
determined by [Process 2 Par] and [Process 2
Scale]. The 8 character description will be
shown on line 2 of the display.
Display/Drive Units: Numeric/Text
Parameter Range: Alphanumeric
Parameter Type: Read & Write
Group: Process Display
Minimum Value: 32
Factory Default: 115
Maximum Value 127